|
LARGEST SELECTION OF MEMPHIS SHADES PRODUCTS AVAILABLE ANYWHERE, IN STOCK!!
Memphis Shades Lowers Mounting Kit, for Memphis Shades Fats /Slims Windshields
Some available in Polished or Black , See list below. Also Read notes on bottom of page, If Applicable
If your bike is not listed below, There is no mounting kit available from Memphis Shades, For your bike.
Check out our National Cycle line of windshields also.
Choose part number needed for your bike from chart below, Then select part number from menu above:
If purchasing this on Ebay, Include your choice at checkout, or email choice after purchase.
Polished Aluminum Lowers Mounting Kit
Fitments:
1986 - 2009 FLSTC (without OEM light bar) MEM9891
1986 - 2009 FLSTC (with OEM light bar) MEM9891
1990 - 2009 FLSTF (without OEM light bar) MEM9891
1990 - 2009 FLSTF (with OEM light bar) MEM9891
1993 - 1996 FLSTN (without OEM light bar) MEM9891
2005 - 2009 FLSTN (without OEM light bar) MEM9891
1993 - 1996 FLSTN (with OEM light bar) MEM9891
2005 - 2009 FLSTN (with OEM light bar) MEM9891
2008 FLSTSB Cross Bones 2320-0001
1988 - 2007 FLSTSC (with light bar) - See Notes 1, 3 2320-0001
1988 - 2007 FXSTS (with light bar) - See Notes 1,3 2320-0001
1988 - 2007 FLSTC (without light bar) - See Note 1 2320-0001
1988 - 2007 FXSTS (without light bar) - See Note 1 2320-0001
1980 - 2009 FXWG MEM9888
1980 - 2009 FXST MEM9888
1980 - 2009 FXSTD MEM9888
1980 - 2009 FXSTB MEM9888
1991 - 2005 FXD MEM9884
2006 - 2010 FXD - 2320-0010
2006 - 2011 FXDC - 2320-0010
2006 - 2009 FXDL - 2320-0010
2006 - 2009 FXDB - 2320-0010
2006 - 2009 FXDI35 - 2320-0010
2006 - 2011 FXDWG MEM9890
1993 - 2005 FXDWG MEM9888
1982 - 1994 FXR MEM9884
1999 - 2000 FXR MEM9884
1973 - 1985 FX MEM9884
1973 - 2009 XL MEM9884
2002 - 2009 VRSCA - See Note 2 MEM9890
2002 - 2009 VRSCB - See Note 2 MEM9890
2008 - 2009 FXCW - See Note 6 2320-0010
2008 - 2009 FXCWC - See Note 6 2320-0010
Note 1 1988 - 1992 Springer models require headlight relocation kit, PART # DS-280339, SEE RELATED PRODUCTS BELOW
Note 2 Not for VRSCR, Fats shields are not recommended for V-Rod models, See our Memphis Shades Sport Shields.
Note 3 Light bar must be a curved style to allow installation of the upper bolt and spool assembly
Note 4 Must use windshield with 9" headlight cutout
Note 5 Requires OEM Windshield docking hardware Part Number 58221-04, Available at your local Harley Dealer
|
