Cobra's FI2000R takes the worry out of tuning your fuel-injected cruiser. Plug and ride with OEM connectors.
Nearly every fuel-injected motorcycle can benefit from the installation of the Fi2000R. Better throttle response and smoother cruising are just a few of the areas improved by the Fi2000. When your engine has the proper air/fuel ratio metered to it, it can perform to its potential, run cooler and be a much more satisfying ride. Our Fi2000 comes preset for your specific model. It is also set for your bike equipped with an after market exhaust system.
This setting will enhance the performance of the entirely stock bike as well. If you add a high-flow air filter system, you can quickly adjust your particular model because each comes with detailed instructions for making fine tuning adjustments.
The Fi2000 increases horsepower and torque by optimizing stock lean air/fuel ratios (helps cool the engine temperature as well) No confusing computer downloads to install Pre-configured from the factory for your bike and model, but easy to adjust should your specific application need it.
Cobra Fi2000R comes preset for your make and model of motorcycle. It is also set for your bike equipped with an aftermarket exhaust system. This setting will enhance the performance of the entirely stock bike as well. If you add a high flow air filter system, you might need to adjust your particular model. Each comes with detailed instructions showing you how to make those adjustments quickly and easily.
The Fi2000R uses OEM connectors that snap directly onto the bike's stock fuel injector bodies, making for a simple installation. It is model specific so there is no need for complicated downloads or dyno time. It is already preset for your bike.
Perhaps the single most important improvement, even for the stock motorcycle is that with the Fi2000R the engine's cyclinder-head temperature will be reduced by more than 100 degrees on most bikes. That makes the stock bike run better, cooler and be more comfortable for the rider and passenger.
